BFC - Black Fire Cement 310ml Vitcas for Stoves and Fireplaces Expand

BFC - Black Fire Cement 310ml Vitcas for Stoves and Fireplaces

Vitcas Vitcas

BFC-Black Fire Cement 310ml


Black fire cement for use on fire bricks, fire grates, flue pipes, flue brick blocks, boilers and other applications subject to extreme heat. BFC-Black Fire Cement offers excellent adhesion to fire bricks, blockwork, stone and clayware. Resistant to 1250 C. Environmentally friendly. Primarily useful for minor repair work, cracks less than 5mm and seals to form smoke and gas tight joints. 

Main uses of Fire Cement:
• Sealing of visible metal to metal joints
• Sealing of visible joints between flue pipes and stoves in conjunction with stove rope
• Installation or repair of ranges, fireplaces, ovens and boilers
• Assembly of cast iron stove, cookers and ranges

Application: Make sure the area is clean and that all dirt, dust, rust and grease is removed. Cut off the top of the cartridge, screw on the nozzle and cut the nozzle to the required size. Dampen the surface where the material is to be applied. Apply using a cartridge gun. The material will set at room temperatures but the time will be reduced by lighting the fire or applying heat, gradually increasing over a four hour period. After curing any fine cracks that may appear in the cement should be filled with the same material to ensure an air tight seal.

Resistant to 1250oC /2280oF.
Colour: Black
Not suitable for use as a screed or render nor for barbecues or other outside uses unless protected from water.

Coverage: A guide to the amount of the material contained in one 310ml cartridge
Bead dia. 4mm – length approx. 18 metres
Bead dia. 6mm – length approx. 8 metres
Bead dia. 8mm – length approx. 5 metres
Bead dia. 10mm – length approx. 3 metres

€ 10.00

tax incl.

Otherup to +1250*C /2280*F