fbpx

Need help ordering?01 804 1111

0

Heat Resistant Board Adhesive

9.99

This is a ready mixed high temperature adhesive for use with insulation boards, vermiculite boards, high temperature plasterboards and construction boards.

It should be primarily used for the joints between boards. The material can be used to fix boards to brickwork, blockwork etc. So long as the wall is flat and the gap does not exceed 5mm.

Add board adhesive to your stove shopping list now!
SKU: 3711006 Categories: , ,

Description

This Heat Resistant Board Adhesive is a Ready mixed high temperature adhesive for use with insulation boards, vermiculite boards, high temperature plasterboards and construction boards. 

Our Heat Resistant Board Adhesive is primarily for sealing joints between vermiculite boards. The material can be used to fix boards to brickwork, blockwork etc as long as the wall is flat and the gap does not exceed 5mm. If the gap is larger, we reccommend using the Vitcas HB60. This adhesive is tested to 1350 degree C and is resistant to this temperature.

Each tube can cover almost 18 metres, a more specific guide can be found in the coverage tab. You can find application instructions in the tab above.

We recommend storing the Vitcas board adhesive in a cool dry place between 5  and 25 degrees. Please ensure that the lid is replaced properly after each use. Under these conditions the shelf life should be a minimum of 12 months.

Looking for other stove accessories in our range? Discover the complete range by clicking here!

Not sure if this Vitcas Board Adhesvie is what you need for your stove? Ask a member of the team. You can talk to us by clicking here!

Application

Thorough mixing of the product in the bucket before use is recommended.
Surfaces to be joined must be clean, dry and free of dust.
The faces of construction board should be wetted before application.
The material should be applied onto the surface of the boards or the edge of the boards with a 6mm tile comb to give a 3mm bed.
The product is air setting and the setting time is affected by the bed thickness and the ambient temperature. At 20oC, at least 12 hours should be allowed for setting.
When the material is dry it can be sanded if required.

Coverage

A guide to the amount of the material contained in one 310ml cartridge

Bead dia. 4mm – length approx. 18 metres
Bead dia. 6mm – length approx. 8 metres
Bead dia. 8mm – length approx. 5 metres
Bead dia. 10mm – length approx. 3 metres