fbpx

Need help ordering?01 841 9976

0
Twin Wall Rain Cap with Mesh

Twin Wall Rain Cap with Mesh

€79.99

Twin Wall Rain Cap with Mesh are a must have for all homes with a stove, or open fire.

The primary purpose of this rain cap is to prevent rain, snow, debris, birds, or animals from entering the chimney or vent pipe while allowing proper ventilation and exhaust of combustion gases.

Choose the flue size required in the box below!
Categories: , ,

Description

Twin Wall Rain Cap with Mesh has adds debris protection

A twin wall rain cap with a mesh is typically used in chimney systems or vent pipes of various heating appliances, such as wood stoves, pellet stoves, or gas fireplaces. The primary purpose of this rain cap is to prevent rain, snow, debris, birds, or animals from entering the chimney or vent pipe while allowing proper ventilation and exhaust of combustion gases.

The installation process has been laid out by our team. We recommended installation is only done by a trained tradesman. Instructions can be found in the tab below. It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year. This helps to maintain a healthy burning inside your stove. Ensuring your equipment lasts longer.

Looking for other flue fitting accessories in our range? Discover the complete range by clicking here!

Not sure if this Chimney Cowl is what you need for your stove? Ask a member of the team. You can talk to us by clicking here!

Installation

Two important things to note!

  • If you are using an inside mount cowl on a tile flue, caulk it into place with silicone sealant.
  • If you are using an inside mount cowl on a metal flue, do not use the sealant.

Metal chimney flues get too hot and can damage the sealant. For a cowl that attaches to the chimney, plan the spacing of the masonry anchors before attaching the cap.

Use an anchor on each side of the chimney. Keep the anchors at least one foot apart. Slide the chimney cowl flange onto the crown of the chimney. Then straighten it using the level.

Follow all provided directions for application. If the cowl must be screwed on, hold the cowl flange tight against the masonry and drill through both at once. Sink the masonry anchor, then insert the first screw into the bracket and tighten it into place.

Drill the next hole on the same side as the first. Use the level and work around the perimeter of the chimney, tightening consecutive screws as you proceed.

Related products