fbpx

Need help ordering?01 804 1111

0

Heat Resistant Tile Adhesive

9.9939.99

Vitcas Heat Resistant Tile Adhesive is a ready mixed tile adhesive specially formulated for use in high temperature conditions.

It is best used in situations where ordinary tile cements are inadequate for the long term retention of tiles.

Add silicone sealant to your stove essentials now!
SKU: 3711006-1-1 Categories: , ,

Description

The Vitcas Heat Resistant Tile Adhesive is a ready made tile ahesive. 

Our Heat Resistant Tile Adhesive is specifically formed for using in conditions which high temperatures are reached. This means that ordinary tile cement is inadequate for sealing tiles in place. This adhesive has been tested to 1000 degree celcius. As such it is resistant to this temperature. Each tube can cover approximately 300ml per 0.125 square metre.

Using a heat resistant cement has many benifits than a regular joiner. Firstly, there is excellent adhesion to most building materials. This silicone has an easy application, thanks to it’s easy to use tube. It is also available in a larger 5kg tub for tradesmen. This sealant is used for applications in areas such as fixing tiles in areas subject to high temperatures. Also used in fire surrounds, behind boilers and behind ranges, cookers and radiators.

We recommend storing the Vitcas Tile Ahesive in a cool dry place between 5  and 25 degrees. In case of any doubt the temperature should be checked in the area of proposed application. If it exceeds 1000 degrees, do not use this.

Looking for other stove accessories in our range? Discover the complete range by clicking here!

Not sure if this Heat Resistant Tile Adhesive is what you need for your stove? Ask a member of the team. You can talk to us by clicking here!

Coverage

A guide to the amount of the material contained in one 310ml cartridge

Bead dia. 4mm – length approx. 18 metres
Bead dia. 6mm – length approx. 8 metres
Bead dia. 8mm – length approx. 5 metres
Bead dia. 10mm – length approx. 3 metres

Application

Make sure the area is clean and that all dirt, dust, rust and grease is removed.

Cut off the top of the cartridge, screw on the nozzle and cut the nozzle to the required size. Dampen the surface where the material is to be applied.

Apply using a cartridge gun. Aim for a final thickness of 3mm.

When applying on fresh cement or plaster surfaces or with porous tiles, it is important to seal the surface using PVA before applying the adhesive, otherwise bonding may be impaired.

Surplus Vitcas Heat Resistant Tile Adhesive must be removed immediately from any tile surfaces with damp cloth.