fbpx

Need help ordering?01 804 1111

0

Stove Register Plate

84.99

This Register Plate can be cut on-site to fit the base size of your chimney stack.

The Register Plate will support vermiculite insulation and stop any debris from falling down the chimney stack throughout the year.

Choose the correct diametre for your flue below.

Description

The Stove Register Plate is available in a 5 inch or 6 inch diametre.

A Stove Register Plate is used by an installer to seal off the base of the chimney.  This Register Plate measures 900mm x 495mm. Each plate has a centre cut hole, which is suitable for 125mm and 150mm. Please ensure you choose the correct diametre. This Register Plate can be cut on-site to fit the base size of your chimney stack. The Register Plate will support vermiculite insulation and stop any debris from falling down the chimney stack throughout the year.

The installation process has been laid out by our team. We recommended installation is only done by a trained tradesman. Instructions can be found in the tab below. It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year. This helps to maintain a healthy burning inside your stove. Ensuring your equipment lasts longer.

Looking for other flue fitting accessories in our range? Discover the complete range by clicking here!

Not sure if this Stove Register Plate is what you need for your stove? Ask a member of the team. You can talk to us by clicking here!